套标机厂家

全国热线

18016279595

产品banner
您当前的位置 : 首 页 > 湘西零配件
湘西套标机分瓶螺杆

湘西套标机分瓶螺杆

  • 所属分类:湘西零配件
  • 浏览次数:
  • 发布日期:2020-01-09
  • 产品概述

分瓶螺杆:将欲套标瓶做等距分开,进入带瓶组。

分瓶螺杆的常用材质有三种:第 一种,国产POM和进口POM材质,常用的为国产POM材质,优点是成本较低,特性是不易变形,自润滑性能高,不会划伤瓶子。进口POM特性属于国产POM加强版,但是成本较高,所以大多数人设计师在非必要情况下还是选择国产POM材质。

第二种,MC尼龙材质,成本与POM相差不大,常应用于冲击力较大需要耐冲击的环境,特性是耐冲击、耐刮擦,自润滑性能好,耐磨,有些朋友遇到分瓶螺杆经常断裂的情况下,可以尝试使用下MC尼龙的材质;

第三种,PE材质,PE的成本方面跟前面两种相差不大,分瓶螺杆行业里用的比较少,PE材质最 大的特性就是耐磨,很多朋友反映分瓶螺杆由于磨损较严重需要经常更换,建议可以试用一下PE材质的分瓶螺杆。

Bottle-separating screw: Separate the standard bottles to be set into equal sets and enter the group with bottles.

There are three commonly used materials for bottle splitting screws: the first one is domestic POM and imported POM materials. Domestic POM materials are commonly used. The advantages are lower cost, characteristics are not easy to deform, high self-lubricating performance, and it will not scratch the bottle. Imported POM features belong to the enhanced version of domestic POM, but the cost is higher, so most people choose domestic POM materials under unnecessary conditions. 

The second type, MC nylon material, has the same cost as POM. It is often used in environments where the impact force is large and needs impact resistance. The characteristics are impact resistance, scratch resistance, good self-lubricating performance and wear resistance. In the case that the bottle screw often breaks, you can try using MC nylon material;

The third type, PE material, the cost of PE is not much different from the previous two. The bottle screw industry is less used, and the PE material is the largest The characteristic is wear resistance. Many friends report that the bottle split screw needs to be replaced frequently due to severe wear. It is recommended to try the bottle split screw made of PE material.



标签

上一篇:没有了
下一篇:套标机刀盘2020-01-09

最近浏览:

相关产品

相关新闻

20150626074446_867 拷贝.png

地址.png

  地址 : 上海市嘉定区安亭镇新黄路136号6幢  

  电话 : 021-39521668 

 邮箱 : shruizhaopack@163.com


自动化贴标机    关注我们